Radians Custom Molded Ear Plug Kit

11-4240-1
  • 11-4240-1
    11-4240-2
    11-4240-3

Radians Custom Molded Ear Plug Kit

90 reward points
/5
RRP : £22.95 £17.96Saving you 22%
Reference : 114240
Stock site
In Stock
Reference 114240
Brand RADIANS
Colour Beige
Product type Ear Plugs
Protection 23 dB
Radians
Radians Custom Molded Ear Plug DIY Kit

Easy, do-it-yourself kit, molds in 10 minutes. Dozens of everyday uses including shooting sports, Security work and Military application.

Benefits of the Radians Custom Molded Ear Plug Kit:
  • Soft, permanent custom fit with simple, easy to follow instructions.
  • Safe, non toxic and hypo-allergenic silicone construction.
  • Reduces up to 23dB level. EN Confirmation No. 352-2 :2002
  • Made in the USA 

N.B: These kits come with instructions, however the instructions are also included here for review prior to purchase.


Follow the following instructions COMPLETELY to avoid compromising the fit you achieve with this product.

Your Ear Plug Kit was shipped with canisters of colored (red, blue, green, orange, light gray or natural) and white silicone that must be mixed according to the following instructions to properly mold to the shape of your ear.

Step 1:
Clean your ear and wash your hands thoroughly. Have a mirror (or willing assistant) ready before beginning.

Step 2:
Gently remove the colored (red, blue, green, orange, light gray or natural) material from the container and divide into two equal portions. Store the second portion in the same container; it will be used for your other ear. Repeat for the white material. Keep the colored (red, blue, green, orange, light gray or natural) and white materials separated until ready to begin the molding process, since mixing the two will start the curing process.

Step 3:
Knead together the colored (red, blue, green, orange, light gray or natural) and white portions for one ear until thoroughly mixed (about 30 seconds) and roll mixture into a uniform ball. This begins the curing process. Immediately proceed to steps 4-5.

Step 4:
Place the mixture in your ear and gently apply light pressure so the material forms a cast and contours to the ear. Once a uniform, consistent form is achieved, let cure for a minimum of 15 minutes in the ear.

Step 5:
Any excess material not needed to form mold can be pinched off before totally cured and discarded. A mirror (or willing assistant) is helpful to render a smooth outer surface and finished look. DO NOT REMOVE PLUG FROM THE EAR FOR A MINIMUM OF 15 MINUTES. Once cured, gently remove plug by slowly twisting and pulling from top of formed plug. It is recommended the finished ear plug cure an additional three hours before storing in storage bag, however, plug can be used after the 15 minute molding process. A properly formed Ear Plug will have a smooth outer surface, closely contour to the ear and fit snugly.

Step 6:
Repeat for other ear.

PLEASE READ THE FOLLOWING WARNINGS: Use only as directed. Do not use with latex gloves. Adult supervision required for children. Read and follow all instructions. Do not remove Ear Plug for a minimum of 15 minutes after forming in the ear. Mold material must cure fully before removing from ear. Do not force mold material into ear canal. Do not elongate mold material. Misuse or improperly following instructions may lead to serious injury. Keep out of reach of children. Not responsible for misuse. Do not eat.

Not CE Certified.

Customers who bought this product also bought
You may also be interested in
In Stock
Sale on RRP
3M Peltor Foam Ear Plugs
Peltor
£1.79 £1.34
In Stock
Sale on RRP
3M Peltor Corded Foam Ear Plugs
Peltor
£2.49 £1.76
In Stock
Sale on RRP
Radians Resistors 27 Ear Plugs
Radians
£1.79 £1.34
In Stock
Sale on RRP
Peltor PTT Adaptor for SportTac & ComTac
Safe payment via ...
UkmcPro is a company dedicated to supplying the best quality Military Kit and Police Equipment where it's needed most, without breaking the bank. With more than 20 years of experience, from procurement of Military Equipment to dealing with individuals, we pride ourselves on our customer service and knowledge of the brands we sell.  UkmcPro has grown over the years from a small Mail Order Catalogue handling Army Surplus to one of Europe's most prominent retailers and a leading force in offering bespoke Tactical Kit.

By prioritising the best Tactical brands we ensure that the Tactical Kit we offer will stand up to the test of Professional use.  Brands such as Blackhawk, Tru-Spec, FAB Defense, Under Armour Tactical, Bulldog Tactical Gear, Smith Optics Elite, Vertx, Snugpak, Camelbak, Ka-Bar, Gerber, Leatherman and more. UkmcPro are stockists of top quality gear designed for Special Forces & Armed Response Units such as Tactical Clothing, Combat Clothing, MTP MOLLE Pouches, Plate Carriers, MOLLE Chest Rigs, MIlitary Boots, Load Carrying Systems, Military Webbing, Sleeping Bags, MIlitary Daysacks, Camping Equipment, LED Torches, Multi-Tools, Mag Pouches, MTP Trousers & Clothing, Multicam Gear, SAS Smocks, Tactical Gloves, Weapon Accessories, Army Rucksacks, MOLLE Belts, Assault Vests, Thermal Base Layers, Ballistic Glasses, Tactical Goggles, Pistol Holsters for Glock, UBACS Shirts, Protective Knee Pads, Morale Patches, Camping Knives, Combat Belts, Tactical Caps, Ghillie Suite, Camo Accessories, Rifles Scopes, Glock Accessories,  and much much more.